|

In addition to plastilina, there
are other modeling clays used by
sculptors to create lasting
pieces.
Air-dried or non-firing
modeling clays (also known as
self-hardening or air-hardening)
do not need to be fired in a
kiln, and are generally ceramic
clay body formulas with a
natural additive, such as
cornstarch, to make them harden.
They are not meant to replace
kiln-fired ceramic clay,
cannot be used to produce
functional ware, and cannot be
left outside exposed to the
elements. Pieces made using
these clays are items for
display only. The material
should not be fired in a
ceramic kiln under any
circumstances. It is porous and
cannot hold liquid unless sealed
on the inside surface.
After a
finished piece has dried and been sealed, it can be
decorated for display in a number of interesting ways.
You can add bright colors
using acrylic, oil, latex, or watercolor paint, or you
can achieve mute color effects using wood stain, wax
pigmentation applications, or clothes dyes. You can also
spray the finished piece with special effect paints
obtained from hardware stores.
There are two
basic types of air-hardening
clay. The first type,
Claystone, works like
plastilina and is usually used over an armature,
an internal support device. The clay material generally
contains some type of pulp or cotton fiber filler to
reduce shrinkage and thus prevent cracking. (The armature
will not give when the clay shrinks due to evaporation
of moisture.) Please note, there may be some degree of
shrinkage when using a water-base material, so expect
minor cracking if the piece is thin and modeled over a
solid support. Cracking
may also appear at sharp angles and joints. The material
over an armature will most likely be fatty or more bulky
due to the filler that is incorporated in the formula to
reduce shrinkage.
The second type of air-hardening clay,
Boneware,
is used for solid direct modeling that in essence will
be supported by its own bulk. It will contain a natural
hardener,
but not fiber, to reduce shrinkage and will probably
feel and react more like a ceramic clay to the touch and
in workability.
There is
another type of self-hardening
material that can be air-dried or fired in the kitchen
oven to give the piece more durability. An example of
this material is
Della
Robbia.
This type of material will not replace a kiln-fired
ceramic clay that is fired in excess of 2000°F fusing
the molecular structure and becoming vitrified and
non-porous. Please note, for any self-hardening
clay there is no known method to emulate vitrification.
Visit our
online modeling store
to view our plastilinas,
self-hardening modeling clays,
armatures, modeling stands and a
wide variety of wood and steel
sculpting tools and accessories.
|